|
With a 900 horsepower absorption capacity, the 2WD 600 can handle those sophisticated performance tests you used to turn down or send elsewhere. The 600’s stength is its ability to test heavy duty diesel trucks, as well as high speed FWD and RWD race cars. When equipped with the optional bike attachment, the 2WD 600 can also test motorcycles. The 2WD 600’s 108” outer track means you can test wide vehicles such as dual wheel trucks without having to remove the outer tyres.
The 2WD 600 includes an eddy current power absorption unit (PAU) with air-cooled, frictionless operation and infinitely variable loading. A complete control and data acquisition system - including a wireless hand-held unit so operators can control the test from the vehicle - lets you design a wide range of tests and provide both on-screen and print-out results. While designed for in-ground installation, the unit can be installed on the shop floor and used with the optional lift kit.
The 2WD 600 lets you measure horsepower, test drivetrain components and features like cruise control for driveability complaints, conduct road tests without ever leaving your facility, and provide performance testing for aftermarket enhancements.
Available in Single or Dual Eddy versions.
Specifications
| Horsepower: |
1,800 hp maximum measurement capability
900 hp peak absorption (SE)
1,800 hp peak absorption (DE)
|
| Loading: |
Air-cooled eddy current power absorber |
| Maximum Speed: |
200 mph |
| Inertia: |
Approx. 2,000 - 2,250 lbs |
| Controls: |
DAC based Controller w/Microsoft Windows™ based Software. Ethernet based communications between personal computer (optional) and controller. Includes Patented Virtual Road Simulation Technology (RST) |
| Remote Control: |
Wireless in-car controls available |
| Rolls: |
Precision machined & dynamically balanced
Knurled finish for superior tyre traction belted for bi-directional capability.
19.75" diameter balanced rolls
41" face length
26" inner track width
108" outer track width |
| Frame: |
Heavy-duty structural steel frame
Heavy-duty restraint kit included
|
| Lift: |
Between roll lift with integrated roll lock |
| Axle Weight: |
6,000 lbs maximum |
| Shipping Weight: |
8,800 lbs (dyno only) |
| Air Requirements: |
80-120 PSI, dry, regulated, oil free |
| Power Requirements: |
115 VAC single phase, 60 Hz, 15 Amps (computer)
Requirements: 230 VAC single phase, 60 Hz, 40 Amps (dynamometer controls)
230 VAC three phase, 60 Hz, 40 Amps (DE)
|
| Options: |
• Second PAU (DE)
• SmartTach Engine RPM
• Pressure Sensors
• Air to Fuel Ratio Modules
• Optical RPM Pick-up
• Computer System with monitor
• Above Ground Kit
• Above Ground Lift
• Integrated Xmas Tree
• Wireless Touchscreen Interface
|
• Vehicle Cooling Fan
• Temperature Sensors
• Weather Station
• 5 Gas Analyzer
• OBD Interface
• On-site Training
• Opacity Meter
• Vehicle Pull Down Kit
• Motorcycle Kit
|
|
2WD 600 Downloads
Enquire about this dyno
Other Dynos
|
2WD 600
